Polycom AVAYA DEFINITY LINKPLUS SPECTRALINK 6000 - Manual (Page 19)

Interface Implementation
PN: 1725-36130-001_E.doc 19
• To make the handset ring when the wired station rings, change
Bridged Call Alerting to Yes on the wired station.
If the handset is not a bridged appearance of a wired station, assign
buttons 1-3 as call appearances (call-appr).
Duplicate programming
After the model handset or phones have been completely
programmed, use the duplicate station command to copy the
programming to all “like” handsets. Change the extension of the
bridged appearance on each set as it is copied.
The installer can now test the handsets.