Peavey HP Special - Manual (Page 6)

Tone Control (
3
)
simple passive tone control. Rotating clockwise increas-
es treble while rotating counterclockwise decreases tre-
ble.
Output Jack (
4
)
The output jack accepts standard guitar patch cords.
(We recommend high-quality Peavey “shielded” patch
cords.)
A
djustments
Your instrument has been carefully adjusted at the Peavey
factory for accurate intonation and playing ease. However,
your playing style and requirements may necessitate addi-
tional adjustments. These should be made by your autho-
rized Peavey dealer; but with a little care and by closely
adhering to the following instructions, you may attempt
these adjustments yourself.
Please read the instructions thoroughly before attempting any
adjustments
.
Torsion Rod (
1
)
All guitar necks have a slight amount of bow to keep the strings
from “buzzing” on the frets. This instrument
features an easy access torsion rod adjust-
ment wheel located at the end of the neck.
This wheel can be adjusted with a hex
wrench or small screwdriver. Just insert the
tool into the adjustment wheel and rotate
accordingly.
1. Tune the instrument to
standard (A-440) pitch.
2. Fret the sixth string (E) at the
first and last frets.
3. Check for clearance between
the string and the
eighth fret.
5
1