Planar PE1900 - Manual (Page 21)

19
Adjusting the “OSD Display” submenu
Follow the steps below to adjust the OSD Horizontal and Vertical positions:
1. Activate the OSD “Main Menu”.
2. Use ‘Up (△)’ (or ‘Down (▽)’) to move forward (or backward) to the OSD display icon and
highlight it.
3. Use ‘Select’ button to enter the “OSD Display” submenu. This activates two items for further
adjustment.
If ‘H. Position’ is selected, use the ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of
Horizontal position of the OSD display. The graphic bar and numerical value at the right
corner responds accordingly.
If ‘V. Position’ is selected, use the ‘Up (△)’ or ‘Down (▽)’ buttons to adjust the setting of V.
position of the OSD display. The graphic bar and numerical value at the right corner responds
accordingly.