Plantronics CS70 - Manual (Page 10)

10 Plantronics CS70 Setup Guide
m
ake a
t
eSt
C
all to
C
onfIgure
and
o
PtImIze your
S
yStem
.
5
S
T
E
P
To get the best sound quality for both you and your
listeners You MUST configure and optimize your
system!
Automated Sound Test
866-210-2157
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause
hearing loss. Always listen at moderate levels. For more information on headsets and hearing
visit: www.plantronics.com/healthandsafety
1 . If your desk phone has a volume control, set it to mid-range.
2
. If you have installed the Automatic Handset Lifter, press the Call Control Button on
your headset.
If you have
not
installed the Automatic Handset Lifter, press the Call Control Button
then lift the handset from its cradle (or press the HEADSET button on your telephone,
if it has one).
3
. Verify that you hear a dial tone. If so, continue with step 4.
if you do not Hear a dial tone: Use a coin or paperclip to turn the Configuration Dial
to a different setting until you hear a dial tone.
If you still do not hear a dial tone at any of the four positions, review Setup Guide
Steps 1–4 to verify completion.
4
. Make the test call (TOLL FREE). It’s the quickest way to test and optimize
your system.
A. Make the test call
Press Call
Control Button