ProSpot Fitness Bench FHL-200 - Manual (Page 7)

-- 7 --
Maintenance of ProSpotfitness® Product
Our products are made of durable materials and have been factory tested to assure
proper function and reliability. Along with our Equipment Warranty, this gives the
owner of our product the confidence of a long lasting relationship with
ProSpotfitness® Inc. Our systems are designed in a way to allow easy
replacement of parts both mechanical and electrical if the need should ever arise.
If you are a new owner of a ProSpotfitness® system, three important things need to
be done to assure prompt service under the warranty:
1. Fill out and fax or mail to us your Product Warranty Registration Card along
with a copy of your sales receipt (proof of purchase) if your dealer has not
done this at time of purchase.
2. Your system needs to be set up properly according to the assembly manual.
3. Follow user instructions on how to properly use the system.
Maintenance Program
Note:
Our products are recommended for climate-controlled environments. Outdoor
use is not recommended and will void the warranty.
Carefully inspect machine before each use to determine that it is free from
defects.
Do
NOT use machine if you find:
1. A loose, broken or frayed cable – (needs to be replaced)
2. Any broken, cracked, torn, frayed or defective part of the machine – (needs to
be replaced)
3. Loose bolts or fasteners. Check all fasteners to make sure none have loosened
with use. Tighten any loose fasteners.
5. Pulleys sticking or Cables binding. Check for free movement of all cable and
pulleys.
Adjust or replace if necessary.
Lubrication:
Lubricate the Weight Stack Guide Rods (14) periodically by spraying them with a standard
silicone lubricant found at hardware stores. Do not over lubricate.