Pass Labs X250.5 User Manual
Page 9

9
X250.5 Owners Manual
All figures obtained after a 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain
30 dB
Freq. Response
-3 dB at 1Hz, -3 dB at 100 kHz
Power Output
250 watts @ 1% THD, 1 kHz, 8 ohms
Maximum Output Voltage
plus, minus 60 volts
Maximum Output Current
plus, minus 20 amps
Input Impedance
22 kohm balanced,
12 kohm single-ended
Damping factor
250 ref 8 ohms nominal
Slew rate
plus, minus 50 V/uS
Output Noise
400 uV unweighted 20-20 kHz
Balanced CMRR
-60 dB @ 1 kHz (input common
mode rejection ratio)
DC offset
< 100 mV differential
Power Consumption
350 watts idle, 1000 watts max.
Temperature
25 degrees C. above ambient at idle.
Dimensions
19”W x 22”D x 9.5”H
Weight
110 Lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
X250.5 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.