ParaBody 822 - Manual (Page 6)

STEP 4:
FIGURE 4
STEP 5:
FIGURE 5
6
7
6
15
3
1
• Pull back the SPRING PIN and CAREFULLY slide the MAIN PAD SUPPORT (3) over the FRONT BASE
SUPPORT (1) as shown in FIGURE 5.
• Slide the four ROLLER PADS (7) onto the MAIN PAD SUPPORT (3) using two 3/4 X 16” TUBES (6), and
four STARLOCK COLLARS (13) as shown in FIGURE 4.
• Insert one 1-3/4” SQ. END CAP (15) into the end of the FRONT BASE SUPPORT (1) as shown in FIGURE 5.
13
3