Palsonic 5130GM - Manual (Page 14)

5
3 2 1
7 DSP
AV
9 8
6
0
4
SCAN SLP CAL GAME
P.M
Turning Off
Power On/Power Off
Power On/Power Off
11
Operations
Turning On
1
2
3
Press the POWER SWITCH on the TV set.
If no picture appears and the red indicator lights up, the TV
set is in STANDBY mode. Press button on the remote
control, then the TV set is turned on.
When the TV set is in STANDBY mode, you can also press
the CH+/- buttons on the TV set to turn on the TV.
Note:
If there is no input signal to the TV when the TV is on, blue
background will appear on the screen. (when the BLUEBACK
is set to ON). After 15 minutes if there are still no TV signals
to the TV, it will access standby mode automatically.
1
2
Press the POWER SWITCH on the TV set if you want to cut
off the power completely.
If you want to turn off the TV set temporarily, press the
button on the remote control and the TV is in STANDBY mode.
Notes:
There are three kinds of Auto Power-off function:
1. When there is no input signal for 15 minutes.
2. Sleep-timer function.
3. Off-timer function