Installation, 1 find the channel switch on the transmitter (a), 2 set the channel switch to different number – PYLE Audio SLV5400 User Manual
Page 7: 3 find the channel switch on the receiver (b), Operation, Enjoy your wireless tv link, 1 switch on the transmitter (a), 2 switch on the vcr or dvd recorder, 4 go to tv2, 5 switch on tv2
7
EN
Installation
Remove interference on TV2
1 Find the CHANNEL switch on the transmitter (A).
2 Set the CHANNEL switch to different number.
3 Find the CHANNEL switch on the receiver (B).
4 Set the CHANNEL switch to the same number as
on the transmitter.
Operation
Enjoy your Wireless TV Link
Watch a cable TV program on TV2
1 Switch on the transmitter (A).
2 Switch on the VCR or DVD recorder.
3 Take the remote control of the VCR or DVD
recorder with you.
4 Go to TV2.
5 Switch on TV2.
6 Switch on the receiver (B).
L
Channel
DC 12V
1 2 3 4
R
CHANNEL
1
2
3
4
For basic operation, see
the quick start guide that
came with your Wireless
TV Link.
Your VCR or DVD recorder needs to
be connected to the transmitter (A) of
the Wireless TV Link and connected to
the Cable-TV signal.
STANDBY
SELECT
SLV5400 WIRELESS TV LINK TRANSMITTER
WIRELESS TV LINK RECEIVER