Philips AZT9230 - Manual (Page 20)

RADIO
20
You can tune to any FM or MW station automatically or
manually. Stereo stations are indicated by
ST .
1 Press RADIO·BAND to switch the radio on.
2 Press RADIO·BAND if necessary repeatedly to select
the desired waveband.
y FM 1 , FM 2 , FM 3 , FM 4 or MW is shown.
Tuning to radio stations automatically
1 Keep
3 or 4 pressed for at least 1 second.
y The radio tunes to a station with sufficient
strength and radio play starts.
A
(for “automatic search”) and the current
waveband and frequency are displayed.
2 Repeat searching until you find the desired radio station.
Tuning to radio stations manually
1 Keep
3 or 4 pressed.
2 Release 3 or 4, then briefly press 3 or 4 again
when you are close to the desired frequency.
3 Briefly press 3 or 4 repeatedly until you reach the
desired frequency.
y Radio play starts. The current waveband and
frequency are displayed.
• To switch from radio play to CD play press 2;.
• Press 9 to switch the radio off.
Note: In case of interferences in stereo mode press ·MODE to switch to mono.
PROGRAM
CK
RADIO
·BAND
ET ·
Radio play
English
AZT9230/01.1 eng 30/10/00 11:03 Page 20