Philips CD 155 - Manual (Page 37)

Telephone answering machine (TAM) 35
Press
<
OK again to confirm
deletion of all your messages.
• A validation tone is emitted and the
screen returns to previous menu.
9.3 Switch the answering
machine on/off via handset
Press
m
key in idle mode, scroll
:
to ANSW MACHINE and press
<
OK , scroll
:
to ANSW. ON/
OFF and press
<
OK .
Scroll
:
to ON or OFF and press
<
OK to confirm.
• A validation tone is emitted and the
screen returns to previous menu.
9.4 Record your personalised
outgoing message (OGM)
This personal outgoing message replaces
the default ones. To revert to the default
outgoing message, simply delete the
personal outgoing message you have
recorded. If you are not satisfied with the
recorded outgoing message, simply
record a new message to overwrite the
old one.
Press
m
key in idle mode, scroll
:
to ANSW MACHINE and press
<
OK , scroll
:
to RECORD
OGM and press
<
OK ,
Scroll to ANSWER ONLY or
ANSW.&RECORD and press
<
OK
to select the following outgoing
message options:
**When you record a new personalized
outgoing message, the previous one is
overwritten automatically.
9.5 Set the answer mode
There are 2 answer modes available:
Answer Only and Answer & Record
By default, the answer mode is
ANSW.&RECORD , by which your
correspondent can leave a message on the
answering machine.
This can be changed to
ANSWER ONLY
mode, by which your correspond cannot
leave any messages on the answering
machine.
Press
m
key in idle mode, scroll
:
to ANSW MACHINE and press
<
OK , scroll
:
to ANSWER
MODE and press
<
OK .
1
2
1
2
Options
available for
Personalized
OGM Description
Play OGM* Press
<
OK to playback
existing outgoing
messages (if any).
Record
Messages** Press
<
OK to start
recording the outgoing
message, press
<
OK
again to stop and save the
recording.
Note
The maximum length of
an outgoing message is 2
minute.
Delete
OGM Press
<
OK to delete
the outgoing message.
1
cd155_ifu_master_uk.book Page 35 Tuesday, February 12, 2008 5:44 PM