Polaroid PLA-4260MTR User Manual
Page 22
22
Troubleshooting
Problem
Possible
Solution
No picture.
Make sure the power cord is connected
securely.
Turn
on
the
power
of
the
PDP.
Check
DVI
cable
connections.
Cannot see any information
Turn off AC power of the PDP and the
on the display (OSD and video)
video input source and turn on again.
and the power LED is blue.
No color.
Press MODE to select the desired Picture
Mode.
Color is not correct,
Adjust the Picture Mode options in the
Dark picture.
Video menu.
_____________________________________________________________
Remote control does not
The batteries could be weak. Replace the
operate.
batteries.
Check the polarity of the batteries.
Press
the
TV
button.
Point
the
remote
control
at
the
remote
control
sensor
of
the
PDP.
Install
the
PDP
away
from
fluorescent
lights.
For service, support and warranty information, visit
www.polaroidelectronics.com
or in the US call
1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for
use on the PLA-4260MTR to Petters Consumer Brands, LLC.