Philips e7000 - Manual (Page 9)

9 9
Green LED in position 4: Quadpacer active (factory default setting).
Green LED in top (5th) position: 2 1/2 minute setting - Quadpacer
active with additional timing interval of 0 seconds.
Yellow LED in bottom (1st) position: no timing intervals set -
Quadpacer not active.
To program the desired setting, release the button when the LED
corresponding to your choice lights up.
Note: Selecting 2 1/2 minutes brushing time reduces the number of brushings
available from a fully charged battery.
Dual Speed Control
The Dual Speed Control feature allows you to choose between 2 speed
settings: Normal speed (Max) for optimum brushing performance, or
Reduced speed (Gentle) when an even more gentle action is desired.
Each time you turn your Sonicare on, it will begin brushing at the Normal
speed setting. To change the speed setting:
1 From Normal to Reduced speed: press the Dual Speed Control
button once during brushing.
From Reduced to Normal speed: press the Dual Speed Control
button a second time during brushing.
A distinctive two-tone beep indicates that the speed setting has been
changed.
It is recommended that you brush at the Normal speed setting to maintain
optimal results.
The Normal setting should be selected when Sonicare is used in clinical
trials.
,
,
,