Philips FMXXFD02B/00 - Manual (Page 8)

To be able to use Windows ReadyBoost your computer must have:
– Windows Vista
™ installed;
– a USB 2.0 port;
– access to a flash memory device with at least 1GB available storage.
Using Windows ReadyBoost
• Insert the flash drive USB connector into one of the computer’s
USB ports (fig. 2).
> Windows Vista now checks to see if the flash drive’s
performance is fast enough to work with Windows ReadyBoost.
If so, you are asked if you want to use the flash drive to speed up
system performance: the Windows Vista AutoPlay dialog box will
offer the option of using the device for ReadyBoost.
• You can choose to allocate part of the flash drive’s memory to
speed up performance and use the remainder to store files.
Once a flash drive has been assigned as the ReadyBoost flash drive
you can no longer use it to save files, play music or retrieve video
and pictures.
Notes
• Do not remove the USB flash drive from the computer USB port
while copying and saving data otherwise the drive will no longer be
recognized by your system.
• When operating under Windows the drive name varies, depending
on your Windows version.
Disconnecting the USB flash drive from your computer
Windows® 98SE
• After confirming that the USB flash drive is in standby mode you can
remove the flash drive from the computer’s USB port.
Windows® ME and Windows® 2000
Double-click the Unplug or eject hardware icon in the task bar
in the lower right part of the screen.
In the window that appears, select the name of the device that is to
be removed, then click the STOP button.
When the Stop a hardware device screen appears, make sure
the correct information is displayed, then click the OK button.
When a message appears, indicating that the USB flash drive can be
safely removed, remove the USB flash drive from the computer’s
USB port.
Windows® Vista, XP
Double-click the Safely Remove Hardware icon in the task bar
in the lower right part of the screen.
In the window that appears, select the name of the device that is
to be removed, then click the STOP button.
When the Stop a hardware device screen appears, make sure
the correct information is displayed, then click the OK button.
When the message Safe to Remove Hardware appears, remove
the the USB flash drive from the computer’s USB port.
4
3
2
1
4
3
2
1
8
FRANÇAIS