Setting the sound focus equalizer, Sfeq) 27, Using balance adjustment 27 – Pioneer DEH-P3500 User Manual

Page 27: Setting the sound focus equalizer (sfeq), Using balance adjustment, Audio adjustments

Setting the sound focus

equalizer (SFEQ)

Clarifying the sound image of vocals and in-

struments allows the simple staging of a nat-

ural, pleasant sound environment. Even

greater listening enjoyment will be obtained if

seating positions are chosen carefully. FRT1

boosts the treble on the front output and the

bass on the rear output. FRT2 boosts the treble

and the bass on the front output and the bass

on the rear output. (The bass boost is the

same for both front and rear.) For both FRT1

and FRT2, H setting provides a more pro-

nounced effect than L setting.

1 Press EQ-EX and hold to switch to SFEQ

function.

Press EQ-EX and hold until SFEQ indicator ap-

pears in the display.

# To switch to EQ-EX function, press EQ-EX and
hold.

2 Press EQ-EX to select the desired SFEQ

setting.

Press EQ-EX repeatedly to switch between the

following settings:

FRT1-H (front 1-high)FRT1-L (front 1-low)

FRT2-H (front 2-high)FRT2-L (front 2-low)

CUSTOM (custom)SFEQ OFF (off)

3 Press c or d to select the desired posi-

tion.

Press c or d until the desired position ap-

pears in the display.

L (left)C (center)R (right)

Notes

! If you adjust the bass or treble, CUSTOM

memorizes an SFEQ setting in which the bass
and treble are adjusted for personal prefer-
ence.

! If you switch the SFEQ setting, the HPF func-

tion is automatically turned off. By turning the

HPF function on after selecting the SFEQ set-
ting, you can combine HPF function with
SFEQ function.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Press AUDIO to select FAD.

Press AUDIO until FAD appears in the display.

# If the balance setting has been previously ad-
justed, BAL will be displayed.

2 Press a or b to adjust front/rear speak-

er balance.

Each press of a or b moves the front/rear

speaker balance towards the front or the rear.

FAD :F15 FAD :R15 is displayed as the front/

rear speaker balance moves from front to rear.

# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 34.

3 Press c or d to adjust left/right speaker

balance.

When you press c or d, BAL : 0 is displayed.

Each press of c or d moves the left/right

speaker balance towards the left or the right.

BAL : L9 BAL : R9 is displayed as the left/

right speaker balance moves from left to

right.

Audio Adjustments

English

Section

HHHHHHHHHHHHHH