Т³гж 5, Wire connection guide, Transmitter code learning – PYLE Audio car security system User Manual
Page 5
L
e
a
rn
in
g
b
u
tt
o
n
WIRE CONNECTION GUIDE
Blue
Battery
Starter
Accessories
Ignition
Yellow
Brown
Red
White
Blac k
Ground
Blue
Orange
Brake switch(positve input)
Door trigger input negative
Green
Hand brake switch
negative input
Brown
Brown
Tach signal
(call AC input)
Pink
Siren
Antenna
Yellow
+12V
Yellow
Starter wire
81a
87
86
30
85
Red
Central door
lock connection
Purple
STEP1
DELETE CODE FOR CONTROL UNIT:
Press learning button at control unit until the LED at control unit (near the learning
button) turn off. System will delete all transmitter code.
STEP2
DELETE CODE FOR TWO WAY TRANSMITTER:
Press button at two way transmitter for 8 seconds until
icon at LCD display
turn off, transmitter will delete control unit code.
STEP3
CODE LEARNING:
Press learning button at control unit, LED at control unit (near the Learning button)
will flash once to enter code learning mode. Press any Button on the transmitter,
LED will turn on 0.5 second when received the transmitter code. Continuous doing
the same step for the next transmitter.
NOTE: The transmitter supplied is already programmed to the system.
TRANSMITTER CODE LEARNING