ProForm 595Pi User Manual

Page 10

Text mode
Original mode

11.

Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the
walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

10. Remove the knob from the pin. Make sure that the collar

and the spring are on the pin as shown. Insert the pin
into the Latch Housing (30), and tighten the knob back
onto the pin.

Knob

Collar

Spring