Philips AJ5300D - Manual (Page 12)

13 EN
2
Press AL1/AL2 repeatedly to activate or
deactivate the alarm timer.
» [AL1] or [AL2] is displayed if the alarm
timer is on and disappears if it is off.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until OFF appears.
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
6 Product
information
Note
• Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power 2 X 2 W RMS
Frequency Response 40-20000 Hz
Signal to Noise Ratio >65 dB
Total Harmonic Distortion <1%
Aux Input (MP3 link) 0.6 V RMS 10
k ohm
Tuner (FM)
Tuning range 87 5-108
MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26 dB S/N Ratio
- Stereo, 46 dB S/N Ratio
<22 dBf
<46 dBf
Search Selectivity 30 dBf
Speakers
Speaker Impedance 4 ohm
Sensitivity >82 dB/m/W