Philips 6423LC - Manual (Page 7)

12 ENGLISH ENGLISH 13
C
2 Press the Razor Head Release Button ( 1)
and remove Razor Head Assembly from
the razor unit (
2).
C
3 Brush out hairs from the inside of Razor
Head Assembly and hair chamber.
C
4 Replace the Razor Head Assembly back on
razor.
Every Two Months: Razor Head
Do not mix up the cutters and combs as the
shaving performance may be adversely affected for
several weeks before optimal shaving performance
is restored.
1 Turn razor to OFF (O) position and
disconnect from outlet.
C
2 Press the Razor Head Release Button ( 1)
and remove Razor Head Assembly from
the razor unit (
2).
C
3 Brush the inside of the razor housing.
13
Trimming
To groom sideburns and moustache:
1 Turn razor to ON (1) position.
C
2 Push up trimmer slide switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
4 Close trimmer by sliding trimmer switch
down.
5 Turn razor to OFF (O) position.
3 Replace razor head assembly. Cleaning
Once a week: Razor
◗ Regular cleaning guarantees better shaving
results.
Always turn razor off, unplug from outlet and
remove cord from razor before cleaning.
C
1 Clean the top of the razor with the
supplied brush.