Philips 42PF5320/79 - Manual (Page 9)

7
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the
display. Keep a minimum distance of 0,5m from the screen.
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.
é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input x
ANTENNA 75 Ω jack.
“ Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for
stereo equipment) AV cables 3 to the
VIDEO , AUDIO L and R input jacks of AV .
‘ Press the AV key on the remote control repeatedly until AV is selected.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable 4 with the S-VIDEO input.
S-Video does not provide audio, so audio cables must still be connected to provide sound.
CABLE
RECORDER
IN OUT
4 3
The MONITOR OUT connector can be used for daisy
chaining or to record programs from your TV 6. Only
when a recorder is connected to
MONITOR OUT it is
possible to record an analog program from your TV. See
Record with your recorder, p. 13.
RECORDER
IN OUT
VIDEO
L / Mono
R
6
MONITOR OUT
Recorder (VCR-DVD+RW)
2444.1 en 09-12-2005 11:50 Pagina 7