Philips DVDR630VR - Manual (Page 45)

English
45
Timer Recording
This Recorder can be programmed to record up to 8 pro-
grams within a period of 1 month.
11 Press TIMER.
The Timer Record menu will appear.
• Media – Choose a media (DVD or VCR).
• PR – Choose a memorized program number, or
one of the external inputs from which to record.
• Date – Choose a date up to 1 month in advance,
or select a daily or weekly program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a record mode.
DVD: SP, LP, EP, XP, or AT (Auto)
VCR: SP, LP, AT (Auto)
AT (Auto) mode determines how much time is
available on the disc or tape and switches record
mode, if necessary, to complete recording the
program.
• VPS/PDC – The VPS/PDC system automatically
adjusts the recording time so that even if a pro-
gram is not running to schedule, you won’t miss
it. For VPS/PDC to work properly, you must input
the correct announced time and date of the pro-
gram you want to record.
Note that VPS/PDC may not work with every sta-
tion.
otes
• Stations that use VPS/PDC typically include
VPS/PDC information in the teletext TV guide
pages. Please refer to these pages when set-
ting a timer recording.
• This recorder takes approximately 20 seconds
to switch on and start recording. This means
that when using VPS/PDC, there may be
instances where the beginning of the program
is not recorded.
2 2 Enter the necessary information for your timer
recording(s).
• b / B (left/right) – move the cursor left/right
• v / V (up/down) – change the setting at the cur-
rent cursor position
• Press RETURN to exit the Timer Record menu.
• Press TIMER to display Timer Record List.
3 3 Press ENTER to save the program.
The Timer Record List will appear.
4 4 Press RETURN (O) to exit the Timer Record
List.
5 5 Make sure that you load a recordable disc or
tape and press STANDBY-ON to switch your
unit to Standby.
otes
• The Timer indicator lights on the front panel display.
• If the Disc and Tape indicator are blinking, either no disc
or tape is loaded, or the loaded disc is not recordable.
• The Recorder will record the audio according to the cur-
rent TV tuner setting (Stereo, Mono or Bilingual).
Use the AUDIO button to set the audio before switching
the Recorder to Standby mode.
• You must press STANDBY-ON to stop the Timer
Recording.
• The Recorder will automatically power off when the
Timer Recording ends.
• There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded
.
• The Recommendable DVD discs :
TIMER OK OK
Media PR Date Start Time End Time Mode
Timer Record
Timer Rec List Close
198 min Free
9 DVD 16/05 Sun 10:07 11:00 SP
SP
C07
VPS/
PDC
ON
DVD-R DVD+R DVD-RW DVD+RW
SONY SONY SONY SONY
TDK TDK TDK TDK
Imation Imation Imation Imation
Verbatim MAXELL Verbatim Verbatim
RiDATA RiDATA Memorex RiDATA
Panasonic Fujifilm Fujifilm Fujifilm
LG Ricoh LG Ricoh
Mitsubishi HP Mitsubishi HP
That’s That’s Samsung Ritek
Pioneer Philips Pioneer Radus