Panasonic DMC-LS75 - Manual (Page 16)

16
VQT1C84
Preparation
Setting Date/Time (Clock Set)
Set the mode dial to [ ].
■ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on,
the following screen appears.
A
: [MENU/SET] button
B
: Cursor buttons
C
: Mode dial
1 Press [MENU/SET].
2 Press e/r/w/q to select the date.
D
: Time at the home area
E
: Time at the travel destination (P56)
• w/q : Select the desired item.
• e/r : Set date and time.
•
A
: To cancel without setting the
clock.
3 Press [MENU/SET].
• When you fi nish setting the clock, switch
the camera off, then switch it on in
recording mode to check that the clock is
set correctly.
Changing the clock setting
1
Press [MENU/SET].
2
Press e/r to select [CLOCK SET]
(P65).
3
Press q and perform the above steps 2
and 3 for setting.
4
Press [MENU/SET] to close the menu.
• You can set the clock from the setup
menu (P20).
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately 3
months even if the batteries are removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• Set the date so that the correct date is
printed when you order prints or use the
date stamp (P74).
A
B C
PLEASE SET THE CLOCK
3 CLOCK SET
MENU
: . .
D
E :
:
3 CLOCK SET
SELECT EXIT
0
SET
CANCEL
D/M/Y
00 JAN 1 2007