Poulan Pro PP338PT User Manual

Page 21

background image

21

Slot

7. With your finger between the lines, wrap

the lines evenly and firmly around the

spool in a clockwise direction.

8. Position the lines in the guide slots.

Guide slot

Guide slot

9. Place the spool in the cover as shown

below.

10. Insert the ends of the lines through exit

holes in the sides of the cover.

Line exit hole

Cover

11. Reinstall the spool and cover onto the

trimmer head. Push until cover snaps into

place.

REPLACING THE TRIMMER HEAD

1. Hold the dust cup with a wrench to keep

the shaft from turning while removing and

installing trimmer head.

Dust Cup

2. Remove trimmer head by turning counter-

clockwise (looking from bottom of unit).

3. Thread replacement trimmer head onto the

shaft by turning clockwise. Only tighten

hand tight!