Philips CAW7740N - Manual (Page 6)

Your Wireless Router 4
2.3 Overview of the front side of the wireless router
A
ON: Power on, normal operation
OFF: Power off or failure
B
ON: WAN connection is OK
Blinking: Send/Receive data
OFF: Connection is not established
C
ON: Internet connection is up
Blinking: Data transfering
OFF: Internet connection is down or failure
D
ON: Wireless link is up
Blinking: Send/Receive data
OFF: Wireless disable or failure
E
ON: Ethernet connection is established
Blinking: Send/Receive data
OFF: Connection is not established
F
ON: Success
Flash Flash: In progress
Blinking: Fail
OFF: No connection
G button
Push and hold this button for 3 seconds to install another WPS device
on your network, see 4.6.4.
2.4 Overview of the rear side of the wireless router
A LAN ports
10/100 Ethernet ports (RJ-45). Connect devices to your local area
network on these ports (i.e., a PC, hub, or switch)
B WAN port
Connect your modem to this port
C Reset button
Use this button to reset the power and restore the default factory
settings. To reset without losing configuration settings, see 4.11.3
D Power Inlet
Connect the included power adapter to this inlet
Warning
Using the wrong type of power adapter may damage the Wireless
Router.
For use only with power supply "Leader: MU12-2120100-C5" and/or
"Jentec: AH1212-E".
A B C D F E
G
A C D B
!