Philips AJB1002/79 - Manual (Page 16)

Note
If no button is pressed in one minute, the system exits alarm setting mode. •
Activate/Deactivate alarm timer
Note
Ensure that you have already set the alarms successfully. •
1
Press AL1 or AL2 repeatedly.
If the alarm timer is activated, » or appears.
If the alarm timer is deactivated, » or disappears.
Snooze alarm
1
When the alarm sounds, press REPEAT ALARM/
BRIGHTNESS CONTROL.
The alarm sounds again 9 minutes later. »
The alarm icon begins to blink. »
Note
If no button is pressed in 30 minutes, the alarm stops ringing •
automatically.
Stop alarm sound
1
When the alarm sounds, press the corresponding AL1/AL2.
The alarm stops but the alarm settings remain. »