Pentair 2000 Series - Manual (Page 10)

P/N 075122 10 Rev. C 7-6-01
SECTION V. HOW TO USE THE FILTER LID OPENER TOOL
1. Turn pump off.
2. Open the air relief valve. (See Figure 1.) and wait for
thank water to drain into pool.
3. Remove the clamp ring.
4. Insert the filter lid opener as shown in Figure 2.
a. The tool fits under the O-Ring.
5. Lift the tank lid with the filter lid opener in several
places around the tank.
6. Consult page 5 for filter cleaning and page 3 and 4 for
filter operating instructions.
Lid
O-ring
Filter Lid Opener
(2) Lift Up the
Filter Lid Opener
(1) Insert the
Filter Lid Opener
Tank
Figure 1.
Figure 2.
The Pentair Pool Products Filter Lid Opener Tool may be used on any stainless steel filter tank manufac-
tured by Pentair Pool Products.