Palsonic 6125TS - Manual (Page 11)

7
Replace the battery cover.
3
Install two "AA" batteries
matching the +/- polarities
of the battery to the +/-
marks inside the battery
compartment.
2
Open the battery cover.
1
Please install the batteries before using the remote control.
1. There should be no obstacle between the TV
and the transmitter.
2. Use the remote control within the effective range
as the above figure.
3. If the remote control does not work, please check
whether the batteries are exhausted or the
polarity is wrong.
4. When direct sunlight, and incandescent lamp,
fluorescent lamp or any other strong light shines
on the remote sensor of the TV, the remote
operation may be unstable.
6. When the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries.
6. Do not drop or dampen the remote control.
7. Do not disassemble the remote control.
Notes:
5m
30 30
Battery Installation
Effective range of the remote control