Porter-Cable 440 - Manual (Page 10)

10
CARTON CONTENTS
1
2
3
4
1. 7-1/4" Metal Cutting Saw
2. Cutting Guide
3. Blade Wrench
4. Hex Wrench
Do not operate this tool until you read and
understand the entire instruction manual.
FOREWORD
Porter-Cable Model 440 is a 7-1/4" Dry-Cut Metal Cutting Saw designed to
cut ferrous metals. This saw uses blades that have a 20mm arbor, and that
are rated for 4200 rpm or higher.
UNPACKING
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily
operated the machine.
FUNCTIONAL DESCRIPTION
NOTE: This tool is shipped completely assembled. No assembly time or
tools are required.
ASSEMBLY
OPERATION
STARTING AND STOPPING TOOL
Make sure that the power circuit voltage is the same as that
shown on the specification plate of the machine and that
switch is “OFF” before connecting the tool to the power
circuit.