Setup menu – Philips DVD634 User Manual
Page 16
Setup Menu
11
Basic Operations
1
At Stop mode, press SYSTEM MENU to enter
the Setup menu.
➜ Setup menu appears on the TV screen.
2
Press OK to enter to next submenu or confirm
your selection.
3
Use 1 2 keys to enter the submenu or return to
previous menu.
4
Use 34 keys to select the preferred option.
5
Press SYSTEM MENU again to exit from the
Setup Menu.
➜ All settings will be stored in the DVD player’s
memory even if the DVD player is switched to
power off.
Note:
– During a disc playback, press STOP twice to
enter into the System Menu.
General Setup
Some settings are essential during the star t up of
the DVD player. For example: DISC LOCK,
PROGRAM, OSD LANGUAGE and SCREEN
SAVER.
1
Press SYSTEM MENU to enter the Setup menu.
2
Press 34 keys to choose GENERAL SETUP
menu.
3
Press OK to confirm selection.
➜ Setting for GENERAL SETUP menu appears
on the TV screen.
4
To exit to the default screen, select MAIN PAGE.
Disc Lock
When a disc is locked with a code, the code will
be store in the DVD player’s memory.
During playback of the locked disc, the DVD
player will prompt for the password.
1
Press 34 keys to select the DISC LOCK in the
General Setup menu and press OK to confirm.
2
Enter the submenu by pressing the 2 key.
➜ LOCK: Lock the disc being played.
➜ UNLOCK: Unlock the disc.
3
Press 1 key to return to General Setup menu.
Notes:
– When playback a locked disc, the DVD player
will prompt to enter your password or 3308
(default) password.
– To change the password, refer to option
PASSWORD in PREFERENCE menu.
Program
(not available for DVD discs)
1
Select PROGRAM using 34 keys and press OK
to open the menu.
2
Enter the submenu by pressing the 2 key.
➜ SETUP: To access into Program mode.
3
Press OK to enter into the Program page.
Storing a track
1
Enter a valid track number using the numerical
key pad.
2
Press 1 234 keys to move the cursor to next
selected position.
3
Repeat above sequence to enter another track
number until the whole program is completed.
4
Press S or T to program more tracks.
Exclude a track
1
Press 1 234 keys to move the cursor to the
track that you want to exclude.
2
Enter an invalid track number.