Configuration example – wlan management software, Adding a wlan security switch to the network plan – Polycom 1725-36082-001 User Manual
Page 14
Configuration Guide
PN: 1725-36082-001_G.doc
14
Configuration Example –
WLAN Management Software
Adding a WLAN Security Switch to the Network Plan
Before WLAN Management Software can be used to configure a
WLAN Security Switch, the WSS must be added to the WMS server.
To add a WLAN Security Switch to WLAN Management Software:
1. Assuming that WMS is installed and a Network Plan has been
created, launch the WMS client and connect to the WMS server.
For more information, see the Nortel WLAN Management Software
2300 Series User Guide.
2. In WMS, click
Configuration
on the tool bar.
3. In the
Network Plan Tasks
panel, under
Other
select
Upload WSS
.