Philips DVD-703 - Manual (Page 16)

16
English
Repeat track/disc
¶ To repeat the track currently playing, press
REPEAT.
➜
REPEAT TRK appears on the display.
¶ To repeat the entire disc, press REPEAT a second time.
➜
REPEAT appears on the display.
¶ To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat a sequence:
¶ Press REPEAT A-B at your chosen starting
point.
➜
A
- appears on the player display.
¶ Press REPEAT A-B again at your chosen end point.
➜
A - B appears on the display, and the sequence begins to
play repeatedly.
¶ To exit the sequence, press REPEAT A-B again.
Scan
Scanning plays the first 10 seconds of each
track on the disc.
¶ Press SCAN.
¶ To continue playback at your chosen track, press SCAN
again or press B.
Favorite Track Selection (FTS)
Program
¶ The FTS Program allows you to store your favorite tracks
for a particular disc in the player memory.
¶ Each FTS Program can contain 20 tracks.
Storing an FTS Program
1 Load a disc and stop playback.
2 Use 4 to go to the list of available tracks.
3 Use 2 or 1 to select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
4 Store each track by pressing OK.
➜ The track numbers will be added to the list.
➜ The number of tracks and the playing time of the
program will be shown on the screen and the player display.
When your FTS Program is complete, press B to start
playback or, press 3 to go back to Stop mode. In either
case, the FTS Program will be automatically memorized.
Switching FTS ON/OFF
1 Use 3 4 to move to select desired tracks.
2 Use 2 or 1 to select either ON or OFF.
Erasing a track from an FTS Program
1 Use 4 to go to the list of selected tracks.
2 Use 2 and 1 to select the track number you wish to erase.
3 Press OK.
➜ The track number will be erased from the list of selected
tracks.
Erasing the complete program
1 Use 4 to select CLEAR ALL, then press OK.
➜ The complete FTS Program for the disc will be erased.
O
PERATION