Panasonic BL-C30 - Manual (Page 16)

Installation/Troubleshooting
16
5. When the Single Camera page is displayed, the setup is completed.
• If Security Warning window is displayed, click [Yes] (see page 17).
• See page 18 for Security Warning window when using Microsoft ®
Windows ® XP Service Pack 2.
Notes
• See page 10 of the Operating Instructions on the Setup CD-ROM for the
Single Camera page.
• If you enable the Internet access to the camera, follow the procedures
below.
• When you are using a router supporting UPnP™
• When you are using a router not supporting UPnP™
Follow the procedures shown on page 13.
1. Enable the Auto Port Forwarding feature on the UPnP page
(see page 40 of the Operating Instructions on the Setup CD-
ROM).
2. Register with the Viewnetcam.com service on the
Viewnetcam.com page (see page 41 of the Operating
Instructions on the Setup CD-ROM).
3. Confirm the Internet access to the camera (see page 8 of
the Operating Instructions on the Setup CD-ROM). If you
cannot access the camera, see page 25.