Philips HTR5224 - Manual (Page 20)

20
Search and store radio stations
individually
1
Press RADIO .
2
Press .
It starts searching until a radio station »
is detected.
To fi ne-tune the radio frequency, press
»
.
3
Press PROGRAM .
The preset station number blinks. »
If no action is carried out within 20 »
seconds after the above step, it exits
the preset mode.
4
Press / (or the Numeric buttons )
to select a preset number to store.
5
Press PROGRAM to confi rm.
Use sleep timer to power off
Use the sleep timer feature to switch this
Digital Receiver to standby automatically after
the preset time.
1
Press SLEEP repeatedly to select the
countdown time before power off.
‘60 > 45 > 30 > 15 > OFF’ is »
displayed.
To cancel the sleep timer, select •
‘OFF’.
If the timer has been set, press
•
SLEEP to view the time left or press
repeatedly to set a new power off
time.
Listen to radio
1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
/ Selects a preset radio station.
Tunes the radio frequency up or
down.
DELETE Press and hold to delete the
current radio station from the
preset list.
The preset number for other
radio stations remain unchanged.
Note
If the FM radio station transmits RDS (Radio •
Data System) data, the name of the radio
station is displayed.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are »
replaced.
Note
Check the radio antenna connection if no •
stereo signal is detected or less than 5 stations
are detected during radio installation.
EN