Panasonic BL-C10 - Manual (Page 97)

Operating Instructions
97
Automatic Setup (Local or Internet Access) or Manual Setup
1. Click [Execute] on the Camera List window shown on page 95.
2. Click each button to execute the program.
Notes
• For the first time installation or after pressing the Factory Default Reset
button, you must select [Automatic Setup (Local Access Only)]. To start
the Manual Setup, execute Automatic Setup (Local Access Only) first, and
then start the Setup Program to execute the Manual Setup.
• See the Getting Started for the local and Internet access setup.
Manual Setup window
Set up each parameter seeing page 31—page 32.
When more than 20 minutes passes after turning on the camera, it cannot be
set up. If it cannot be set up, restart the camera.
• If "Camera setup complete" is displayed, click [Close] to finish the Manual
Setup.
3.
Close all Setup windows.
Sets up Local Access.
Sets up Internet Access.
Starts the Manual Setup.
Displays the Setup page (see
page 27).