PYLE Audio PSWLE58 User Manual
Page 3
-6-
-3-
Wood stud
F
H
Part 1a-Wood Stud Mounting
.
Use wall plate(1) as a template, make sure it is level, and mark four mounting
holes along the center lines of the wood studs. Drill four 3/16
)
)
.
.
”
”
(5mm)dia
holes 2 (50mm) deep. Level wall plate(1) and attach to wall with four long
bolts(F and four washers(H . Tighten screws firmly Do not overtighten
Part 1a-Wood Stud Mounting
2 50mm)
”
(
Φ3/16 (5mm)
”
2,3
1
Part 3-Mounting the flat panel screen
NOTE:
Hook the top of brackets
onto the top flange
of wall plate(1). Then swing the screen down.
(2,3)
Always use an assistant or mechanical
lifting equipment to safely lift and position
heavy equipment.
Part 3-Mounting the flat panel screen
NOTE:
Use the Locking bar(4) to prevent the TV from being removed or
accidentally knocked off of the wall plate.When the locking bar half
insertes into the wall plate , you can use the rotating rod(5) to make it
fully inserted.
Stud finder
4
5