Philips DC156/37 - Manual (Page 16)

16
English
CD Operation
Basic playback controls
To play a disc
●
Press 2; to start playback.
➜
The current track number and the PLAY icon
are displayed during disc playback.
To select a different track
●
Press TUNING
4 ¢ (on the remote
control
4 / ¢) once or repeatedly until the
desired track number appears in the display.
To find a passage within a track
1
Press and hold down on TUNING
4 ¢
(on the remote control
4 / ¢).
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release TUNING
4 ¢ (on the remote
control
4 / ¢).
➜
Normal playback continues.
To interrupt playback
●
Press 2; during playback.
➜
The display freezes and the PLAY icon flashes
when playback is interrupted.
➜
To resume, press 2; again.
To stop playback
●
Press
9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER, iPod or AUX.
– you select standby.
IMPORTANT:
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD-R
(CD-Recordable) and CD-RW (CD-Rewritable).
●
CD-ROM, CD-I, CDV, MP3 CD, VCD, DVD or
computer CDs, however, are not possible.
1
Select CD source.
2
Lift the CD door on the top of
the system to open the CD
compartment.
➜
“ OPEN” is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on PULL TO OPEN to close the
CD door.
➜
“ rEAd” is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks is shown.
SOURC E
DOCK
STANDBY-ON
REPEAT DBB
CD/CD -R/CD -RW COMPATIBLE
PRESE T
iR
MICRO SYSTEM DC156
PULL TO OPEN
pg001-pg024_DC156_37_Eng 2010.4.19, 9:42 16