Philips Senseo HD7800 - Manual (Page 12)

C
◗ Clean the water reservoir thoroughly in hot water, if necessary
with some washing-up liquid.
5 Rinse the parts with fresh water after cleaning and put them
back onto the appliance.
Descaling
Regular descaling will prolong the life of your appliance and will
guarantee optimal brewing results for a long time.
C
1 Fill the water reservoir with a descaling agent up to the MAX
indication and put the water reservoir back on the appliance.
Use a descaling agent based on citric acid.
Follow the instructions on the package of the descaling agent.
C
2 Put a bowl (with a capacity of at least 27 fl. ounce) under the
coffee outlet to collect the descaling agent:
C
3 Press on/off button I and subsequently press buttons ° and
°° briefly at the same time to start flushing the appliance.
For the best result, wait at least 30 minutes after flushing the appliance
with the descaling agent.
4 Repeat this descaling procedure one more time.
5 Let the appliance complete two more flushing cycles with clean
water to rinse away any descaling agent residues.
Replacing the mains cord
If the mains cord of this appliance is damaged, it must always be
replaced by Philips or a service centre authorised by Philips, as special
tools and/or parts are required.
ENGLISH 12