Peavey Q 231F Dual - Manual (Page 6)

6
Q231 FX SPECIFICATIONS
All specifications are typical unless otherwise noted.
0 dBV = 1 volt
All specifications are referenced to nominal output level (0 dBV)
unless otherwise stated. All measurements are wide band 20 Hz
to 20 kHz unless otherwise stated.
All specifications measured at 1 V RMS input and unbalanced
output. All sliders at mid position; all switches out unless
otherwise noted.
Frequency Response:
±
1 dB, 20 Hz to 20 kHz
Distortion:
0.005%, 20 Hz to 20 kHz
Input Impedance:
Balanced 20K ohms (equal impedances to ground)
Output Impedance:
330 ohms
Maximum Input Level:
+21 dBV (8 V RMS)
Maximum Output Level:
+21 dBV (8 V RMS)
Nominal Input Level:
0 dBV (1 V RMS)
Nominal Output Level:
0 dBV (1 V RMS)
Input Headroom:
Nominal 21 dB
Output Headroom:
21 dB
Output Noise:
EQ in bypass: -101 dBV
EQ in filter:
-95 dBV
Filter Frequencies:
20 Hz, 25 Hz, 32 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz,
100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz,
400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz,
1.6 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz,
6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, and 20 kHz
Filter Q:
4.77
Maximum Boost and Cut Filter:
+12 dB, -18 dB
Maximum Boost and Cut Gain:
±
15 dB
Low Cut Filter:
40 Hz
Power Consumption:
Domestic: 120 V AC, 60 Hz, 20 watts
Export: 220-230/240 V AC, 50/60 Hz, 20 watts
Dimensions and Weight:
5.25" H x 19" W x 10.75" D
11.7 lbs.
U.S. Patent Pending for circuit providing visual indication of feedback.
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
TM ®