PYLE Audio PDWM 2250 - Manual (Page 2)

1. Open the battery housing by twisting it
counterclockwise.
2. Insert the battery; make sure the +/- polarity is
correct.
3. Fit the battery compartment back on in the
clockwise direction.
4. Set the microphone switch to the first click. The
white LED indicator should light. Set the switch to the
second click.
5. Set the switch to OFF and remove the battery when
the microphone will not be used for a long time.
6. If the LED indicator does not light when switched to
the first click, please recharge the battery.