Panasonic DMC-FX48 - Manual (Page 70)

VQT1X57
70
Advanced (Recording pictures)
∫ Setting the white balance manually
Set the white balance value. Use to match the condition when taking
photographs.
1 Select [Ó] and then press [MENU/SET].
2 Aim the camera at a sheet of white paper etc., so that the
frame in the center is filled by the white object only and then
press [MENU/SET].
∫ Finely adjusting the white balance [ ]
You can finely adjust the white balance when you cannot acquire the desired hue by
setting the white balance.
•
Set the white balance to [V]/[Р]/[о]/[С]/[Т].
1 Press
3
[È] several times until [WB ADJUST.] appears
and then press
2
/
1
to adjust the white balance.
• Select [0] to return to the original white balance.
2 Press [MENU/SET] to finish.
•
You can also press the shutter button halfway to finish.
• The white balance icon on the screen turns red or blue.
• You can finely adjust the white balance independently for each white balance item.
• The white balance fine adjustment setting is reflected in the picture when using the flash.
• The white balance fine adjustment setting is memorized even if the camera is turned off.
• The white balance fine adjustment level in [Ò] returns to [0] when you reset the white
balance using [Ó].
• In the [UNDERWATER] in Scene mode, the white balance is fixed at [AWB], but it can be
finely adjusted.
• White balance fine adjustment cannot be set for [B/W], [SEPIA], [COOL] and [WARM] in
[COLOR MODE].
∫ Auto white balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, auto white balance may not function
properly. In a case like this, set the white balance to a mode other than [AWB].
1 Auto white balance will work within this range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fluorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
K
lKelvin color Temperature
2 [RED]: Press when the hue is bluish.
1 [BLUE]: Press when the hue is reddish.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
DMC-FX48P_PC~VQT1X57_eng.book 70 ページ ２００８年１２月２６日 金曜日 午後６時２５分