Browser, Server setting – Panasonic G70 User Manual
Page 51
48
Browser
Browser
> Settings
Server Setting
Before Internet services can be accessed, you need to subscribe to your
network operator or Internet Service Provider (ISP) to enable the relevant
configuration information. Please contact your network service provider
to ensure that your network settings are correct.
From Browser menu
1 4
Settings
A
(Select)
2 4
to select required server
@
(Edit)
Five server settings can be set up in the phone. If you find your
server’s name under the settings option, select the server and
@
(Edit). If no settings are present contact your Network Service
Provider for these settings. (Server Name, IP Address, IP Port,
Homepage, Linger Time, Select Mode)
Those configuration Options will be given by your network service
provider.
Once completing the entry, press
A
(Save) then press
A
(Activate).
The first time that the browser is activated there will be no content stored
so the Home URL content will be displayed (as defined by the network
operator). The Home URL will be recalled from the cache, each time the
browser is activated. (Cache is the phone’s memory that stores content
downloaded in the past.)
NOTE: Modifying the default settings may cause failure of the Browser.
NOTE: You need to set CSD Setting or GPRS Setting in Phone Option before
setting the server information.
The phone’s WAP (Wireless
Application Protocol)
Browser enables you to
access Internet services
supported by the network,
such as news, weather
reports, sport etc.