Panasonic DMP-BD85 - Manual (Page 9)

9
VQT2H76
C
o
nn
e
c
ti
o
ns
&
Se
tt
in
g
s
STEP 2 : Connecting to an amplifier/receiver
Digital Audio Analog Audio
∫ Via an HDMI AV OUT terminal ∫ Via a COAXIAL or OPTICAL
terminal
∫ Via a 5.1/7.1ch AUDIO OUT
terminal
≥ The HDMI connection supports
VIERA Link “HDAVI Control” (> 22)
when used with a compatible
Panasonic TV.
≥ Set “HDMI Video Mode” and “HDMI
Audio Output” to “On” (> 28).
≥ Set “Digital Audio Output” depending
on the used terminal and connected
amplifier/receiver (> 27).
≥ When connecting a TV (> 8) with
HDMI AV OUT terminal, set “HDMI
Audio Output” to “Off” (> 28).
≥ Set “Digital Audio Output” depending
on the used terminal and connected
amplifier/receiver (> 27).
Cable connections
a Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
b Front speaker (L/R)
c Surround speaker (L/R)
d Subwoofer
e Center speaker
≥ Set the “Analog Audio Output” to
“7.1ch” or “2ch (Downmix) + 5.1ch”,
depending on the used terminal
(> 28).
≥ You can set the “Analog Audio
Output” from the easy setting (> 12).
≥ When connecting equipment with
HDMI AV OUT terminal, set “HDMI
Audio Output” to “Off” (> 28).
HDMI IN
HDMI IN
HDMI IN
HDMI OUT
Multi channel
speakers
Amplifier/receiver
HDMI cable
HDMI cable
COAXIAL IN OPTICAL IN
Amplifier/receiver
Coaxial
cable
Optical
cable OR

 
 
Connect Audio cables to
terminals corresponding
to the speakers you have
connected.
Multi channel speakers
Amplifier/receiver
DMP-BD85VQT2H76_eng.book 9 ページ ２００９年１１月３０日 月曜日 午後５時３２分