Philips TRILINGUAL PHBIG4 - Manual (Page 3)

5 4
Button Functions, cont. Button Functions
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs,
you might need to press the REC button once, then
press it again for three seconds.
Some buttons on the remote might have functions
that are referred to by different names on the
device you are controlling. E.G. PREV.CHAN
may be called RECALL, or ENTER may be
called DISPLAY. These differences depend on the
brand and model of your product. Also, this remote
can only operate features that exist on your prod-
uct. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
1. Red Indicator Lights when any button is
pressed.
2. TV, VCR, CBL, DVD Selects product to be
operated.
3. CODE SEARCH Used for setup.
4. MENU Press and release SHIFT then
MENU to display the menu on the TV. The
red indicator is on continuously to indicate the
remote is in Menu mode, VOL UP/DOWN
keys operate as cursor right/left, CH+/- keys
operate as cursor up/down, and MUTE
operates as OK. Press QUIT button to exit
Menu.
5. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
pressed after channel selection.
6. ENTER Used after direct channel number
entry to immediately change to the selected
channel.
7. RECORD, PLAY, STOP, REW, FF,
PAUSE VCR control buttons operate your
VCR even when the remote is set to operate
the TV.
8. TV/VCR For some TVs, press repeatedly to
select from available viewing sources (antenna,
cable box, VCR, etc.).
9. PREV.CHAN Returns to the previously
selected channel, or DVD repeat toggle. RPT
performs DVD players “A-B Repeat” (or RPT
A.B) function for repeat play of current
Chapter or Track. QUIT Used to exit menu
functions.
10. MUTE Turns off the TV sound while the
picture remains.
11. VOLUME UP/DOWN Changes the volume
level of the product, normally the TV.
12. SHIFT Press and release to access buttons
labeled in Blue (red LED stays on). Press
again to exit Shift mode.
13. CHANNEL UP/DOWN Changes the
channels.
14. POWER Turns product On or Off.
1.
2.
3.
4.
5.
6.
7.
14.
13.
12.
11.
10.
9.
8.