Adjusting initial settings, Setting the clock, Switching the auxiliary setting – Pioneer DEH-P3800MP User Manual

Page 35: Initial settings

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press SOURCE and hold again until

function name appears in the display.

3 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

ClockAUX (auxiliary input)R-SP (rear out-

put and subwoofer controller)

# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down SOURCE until the unit turns off.

Setting the clock

Use these instructions to set the clock.

1 Press FUNCTION to select clock.

Press FUNCTION repeatedly until clock ap-

pears in the display.

2 Press c or d to select the segment of

the clock display you wish to set.

Pressing c or d will select one segment of the

clock display:

HourMinute

As you select segments of the clock display

the segment selected will blink.

3 Press a or b to set the clock.

Pressing a will increase the selected hour or

minute. Pressing b will decrease the selected

hour or minute.

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

1 Press FUNCTION to select AUX.

Press FUNCTION repeatedly until AUX ap-

pears in the display.

2 Press a or b to turn AUX on or off.

Pressing a or b will turn AUX on or off and

that status will be displayed (e.g.,

AUX :ON).

Initial Settings

English

Section