Figure 14 – ParaBody 661101 User Manual

Page 13

Text mode
Original mode

STEP 14

FIGURE 14

• SECURELY attach the four previously removed 3/8 X 1” BUTTON HEAD CAP SCREWS to the rear SHROUD. See FIGURE 14.

Thank you for purchasing the Parabody 661101 Leg Press Adapter Kit. If unsure of proper use of equipment,
call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.

• The 100 LEG PRESS is equipped with a spring pin adjustment to accommodate different sized users and allow easy entry and exit

from the machine. To use, you must slightly push against the foot plates to take tension off the pin.

REAR SHROUD

3/8” X 1” BUTTON

HEAD CAP SCREW

3/8” X 1” BUTTON

HEAD CAP SCREW

SPRING PIN ADJUSTMENT