Philex SLxB - Manual (Page 2)

Setting up the SLxB Aerial Amplifier
SET UP 1
TV AND FM RADIO
DISTRIBUTION
SET UP 2
TV/ VCR/FM
DISTRIBUTION
Main
TV
Main
TV
Aerial
flylead
FM (Radio)
and/or
VHF TV on
EIR modems
Aerial
downlead
Aerial
downlead
UHF (TV)
FM (Radio)
and/or
VHF TV on
EIR modems
Aerial
downlead
Aerial
downlead
UHF (TV)
Video
Recorder
Coaxial
aerial lead
Aerial
flylead
Note: SLx2B operation is similar to SLx4B but with TV1 and TV2 outputs only.
Additional
TV sets /
Hi-Fi
SET UP 1:
TV and FM Radio
Distribution
1. Connect your UHF
aerial downlead to the
IN UHF socket of the
amplifier and the FM
aerial downlead to the
IN FM socket.
2. Connect your TVs and
FM Tuners to any of the
amplifier TV sockets in
any combination.
All TVs and Tuners will
receive the appropriate
amplified signal.
SET UP 2:
Video Cassette Recorder
(VCR) Playback
1. Connect your UHF aerial
downlead to the RF
input socket of the VCR.
2. Connect the RF output
lead of the VCR (usually
connected direct to
the TV) to your aerial
amplifier IN UHF socket.
TV and VCR playback
signals will now be
available to any TV you
now connect to the
amplifier TV sockets.
NB. Some older VCRs will
not pass TV signals whilst
in playback. This can
sometimes be remedied
by contacting your local
dealer for advice.
Additional
TV sets /
Hi-Fi