Philips 14PV125/39 - Manual (Page 13)

13
EN
How to check, change or delete a
programmed recording (TIMER)
1. 1. Press . The main menu will appear.
2. 2. Select 'TIMER' with . Then
press .
3. 3. Select 'TIMER LIST' with ,
and confirm with .
4. 4. Select timer block with .
5. 5. To cancel the recording, press .
6. 6. To end, press .
How to change a programmed
recording (TIMER)
1. 1. Press . The main menu will appear.
2. 2. Select 'TIMER' with . Then
press .
3. 3. Select ONCE, DAILY, or WEEKLY recording
with . Then press
.
4. 4. Select a TIMER block with . (The flashing
number indicates an empty TIMER block.)
5. 5. Press to delete information, and
input correct information with .
6. 6. To end, press . STATUS/EXIT
0..9
CLEAR
0..9
FWD 1 - B
STOP C - L PLAY B - K
FWD 1 - B
STOP C - L PLAY B - K
MENU
STATUS/EXIT
CLEAR
FWD 1 - B
FWD 1 - B
STOP C - L PLAY B - K
FWD 1 - B
STOP C - L PLAY B - K
MENU
Changing the video (colour) system
If you playback recordings made on other video
recorders or if you want to record from external
sources (via the scart socket), the automatic
video-colour detection system may lead to colour
distortion.
You can switch off this automatic detection-sys-
tem as follows.
1. 1. Press on the remote control to
select the TV-colour system presenting the
least distortion during playback.
At each pressing , the display will change
cyclically; AUTO, SECAM, PAL and ME-SECAM.
2. 2. After 5 seconds, the display indication will
disappear.
SYSTEM
SYSTEM
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
→ TIMER LIST
END=EXIT
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
8. Other functions
Video (colour) systems
In central Europe transmissions are broadcast
in PAL (Phase Alternation Line) standard.
France uses SECAM (Séquentiel à mémoire).
In some countries (like USA and Japan), TV
viewers receive their programmes as an NTSC
signal (National Television System Committee).
AUTO
T6411FZ(EN).qx3 03.3.19 16:32 Page 13