Philips CCC 090AT - Manual (Page 30)

Cassette type / Playback Time
Tape Speed T160 T120 T60
SP (Standard Play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP (Long Play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP (Super Long Play)
8 hrs. 6 hrs. 3 hrs.
30 Recording
• You cannot record one channel while
watching another.
• Recording options are on pages
31-37.
• You cannot record if DEFEAT
RECORDING is ON. (REC DEFEAT-
ED will flash on the screen.) Details
are on page 37.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically to
protect the video cassette tape from
damage.
• You can change the tape speed with
the SPEED button while a recording is
in progress, but some distortion may
appear on the tape.
• If you press the REC(ord)/OTR button
during tape playback, recording of
the current TV channel will begin
immediately.
Helpful Hints
Read and follow the steps below to record a TV program.
1
Place a tape with its record tab intact (see page five) in the
TV/VCR. The power will come on. Or, if the tape is already in
the TV/VCR, press the POWER button to turn on the
TV/VCR, if necessary.
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. See tape speed details below.
6
To stop recording, press the STOP/▼ button.
3
Use the CH(annel) o o /p p buttons or the Number buttons to
select the channel you want to record. You can not change
channels during recording.
4
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will glow.
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
● If the tape does not have a record tab, PROTECTED CASSETTE
CANNOT RECORD flashes on the screen briefly. The TV/VCR
will eject the tape. Insert another tape.
5
To pause the recording (for example, during commercials),
press the PAUSE/STILL button. The REC(ord) light will flash.
To resume recording, press the PAUSE/STILL button again
or the REC(ord)/OTR button. The REC(ord) light will glow.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. A tape will play only in the speed in which
it was recorded. When recording, you can change the tape speed
using the SPEED button. You cannot record in LP speed.
The slower the speed, the more programming you can fit on the
tape. SLP is the slowest speed.
1
2
4
3
6
5