Philips VR150/58 - Manual (Page 12)

How to change a programmed
recording (TIMER)
1. 1. Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2. 2. Press . The main menu will appear.
3. 3. Select 'TIMER' with or .
Then press .
4. 4. Select ONCE, DAILY, or WEEKLY recording
with or . Then
press
.
5. 5. Select a TIMER block with . (The flashing
number indicates an empty TIMER block.)
6. 6. Press to delete information and input
correct information with .
7. 7. To end, press .
8. 8. Switch off with .
Problems and solutions for pro-
grammed recordings
STANDBY/ON y y
STATUS/EXIT
0..9
CLEAR
0..9
FWD 1 - B
STOP C-L PLAY B-K
FWD 1- B
STOP C-L PLAY B-K
MENU
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
12
Error message: ' ' flashes in the video
recorder display
• No cassette was inserted. Insert a cassette and
switch off the video recorder using .
Cassette was ejected as soon as the
button was pressed
• A cassette without the security tab was inserted.
Undo the erase protection (chapter 'Manual
recording', section 'Preventing accidental eras-
ing') or insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING'
flashes on the TV screen
• The video recorder is switched on several min-
utes before the start of a programmed recording.
Switch off the video recorder with
. A programmed recording (timer)
will only function when the video recorder is
switched off.
Cassette is ejected during recording
• The end of the tape was reached during recording.
The video recorder does not react
• While a programmed recording is being made,
you cannot operate your video recorder manu-
ally. If you want to cancel the programmed
recording, press
on the front panel. STOP/EJECT
STANDBY/ON y y
STANDBY/ON y y
STANDBY/ON y y
HG273ED(EN).qx3 04.2.3 10:54 AM Page 12