Pioneer SUPERTUNER 3 AVH-P5100DVD - Manual (Page 73)

TV tuner
Important
This manual describes analog TV tuner operation.
If you are already using a Pioneer analog TV
tuner, such as the GEX-P5700TV, read this section.
However, please read the important information
below.
! Pioneer stopped selling analog TV tuners in
the U.S. in 2006, and analog TV tuners are
also no longer available in Canadian markets.
Pioneer does not sell a digital TV tuner in the
U.S. or in Canada.
! In the U.S., the switch from analog TV to digi-
tal TV broadcasting is planned for February 17,
2009.
! In Canada, the switch from analog TV to digi-
tal TV broadcasting is planned for August 31,
2011.
! THIS MEANS THAT AFTER THE DATES SPECI-
FIED ABOVE (SUBJECT TO CHANGE), YOU
CAN NO LONGER USE THIS UNIT WITH AN
ANALOG TV TUNER TO WATCH ALMOST ALL
TV PROGRAMMING BROADCAST OVER-THE-
AIR.
Basic Operations
You can use this unit to control a TV tuner (e.g.
GEX-P5700TV), which is sold separately.
For details concerning operation, refer to the
TV tuner
’s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner
’s operation manual.
1 Source icon
2 Band indicator
3 Preset number indicator
4 Channel indicator
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
4 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRACK).
5 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
# You can also perform seek tuning by pressing
and holding c or d (TRACK).
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P01
to P12 you can easily store up to 12 broadcast
stations for later recall with the touch of a key.
! Up to 24 stations, 12 for each of two TV
bands, can be stored in memory.
Available accessories
En
73
Section
04
A
vailable
accessories